products details

Created with Pixso. Home Created with Pixso. Products Created with Pixso.
Kitchen Commercial Equipment
Created with Pixso.

Mini Baguette Moulder 50g–1.25kg, Natural Felt Gentle Shaping, 220V Single Phase

Mini Baguette Moulder 50g–1.25kg, Natural Felt Gentle Shaping, 220V Single Phase

Brand Name: Astar
Model Number: WG-750
MOQ: 1 pcs
Price: Negotiation
Payment Terms: T/T
Supply Ability: 2000per month
Detail Information
Model:
WG-750
Dough Weight Range:
50g – 1.25kg
Dimensions:
1010 × 960 × 1580 Mm
Voltage:
220V Single Phase
Power:
0.75 KW
Belts:
Natural Felt, Removable / Replaceable
Safety:
Emergency Stop Button + Lift-guard Safety Switch
Packaging Details:
wooden carton
Highlight:

Mini Baguette Moulder 50g–1.25kg

,

Natural Felt Baguette Shaping

,

220V Single Phase Baguette Moulder

Product Description

Hand-moulding 200 baguettes wrecks your wrists—and swapping in a machine shouldn't mean crushed crumb or belt marks on the crust. The WG-750 handles 50g rolls to 1.25kg loaves, fine-tunes in seconds, and runs on a normal 220V plug. Emergency stop plus safety switch. Felt is removable and swappable in minutes.


That "Wonky" Baguette Wasn't a Fermentation Problem

Here's the uncomfortable truth:

If this morning's batch came out thick at one end, thin at the other, faintly scored across the skin, and reluctant to open at the score—nine times out of ten, your formula is fine and your fermentation is fine.​ What went wrong was those 20 seconds at the moulder.
Hand-moulding runs on muscle memory. And muscle memory changes with the shift, with who's on the bench, and with how tired they are. So one tray holds a beautiful torpedo, a hunchback, and one loaf that caved in halfway down. Customers won't tell you the baguettes look wrong.

They just won't come back.

Then there are the hands. After 150 sticks, they're done. Carpal tunnel isn't a baker's badge of honour—it's a ceiling on how much you can sell.

And when you go shopping for a machine, the salesperson says "high efficiency." Meanwhile the three questions you actually need answered are: Will it crush my dough? Will it leave marks? Can a small shop like mine afford the space and the power?

The WG-750 was designed around exactly those three.

One Piece of Dough In. Here's What Happens.

The dough feeds in and passes through three stages:

1.Pre-sheeting​ — evens out the gas pockets without beating the life out of them
2.Curling​ — rolls top-down into a cylinder, building layered surface tension
3.Elongating​ — natural felt belts draw in from both sides, stretching to length with a naturally tapered tail

What comes out isn't a tube. It's a shaped loaf—with a head, a tail, a taut skin, and enough tension to blow that score wide open.​ That ear? The moulder earned it, not the oven.

The Five Questions You're Already Asking

① "50g to 1.25kg? That's a ridiculous spread. Can it really do small rolls?"

It can—and that's the single most valuable thing about it.
Most compact moulders bottom out around 150g. Go smaller and the dough won't feed, slips on the belts, and comes out crooked. The WG-750 goes down to 50g, which means your 55g breakfast rolls, 70g slider buns, 250g demi-baguettes, and 1kg Saturday loaves all run on one machine, four changeovers a day.
For a small bakery that's not "a nice feature." It's not having to buy a second machine, give up another square metre, and teach someone a second set of controls.

② "Will it crush my dough?"

This is the first question any real baker asks, and honestly the only one that matters.
Roller gap and pressure are adjusted independently—there's no single "squash setting." Running a 75% hydration country sourdough? Open the gap, back off the pressure, keep those big wild holes. Running an enriched soft roll dough? Tighten it up and pull a fine, even crumb.
The dials aren't covered in cryptic numbers. Dial it in, note the position, next time just turn it back to the same spot.​ A new hire is productive in an afternoon.

③ "Felt? Doesn't that get filthy—and fall apart?"

Fair question. The answer runs the opposite way from what most people assume.
Felt is the most expensive and most deliberate component​ on this machine, and we specify it because no other material does all three of these at once:
  • Non-stick​ — high-hydration and sugary/enriched doughs don't get their skin torn off
  • No marking​ — no canvas weave or belt texture printed across your crust
  • Genuinely gentle​ — fibre friction rolls the dough; a rubber belt squeezes it. The dough can tell the difference.
As for wear and upkeep: it's a removable design. No teardown, no re-tensioning ritual—swap a belt in minutes. Day to day, a baguette brush clears the flour. Skip the wet cloth unless you have to.

④ "Do I actually need 1.25kg capacity in a shop this size?"

Maybe not today. But you might want it tomorrow.
A 1.25kg ceiling means you can run traditional big sticks, country bâtards, full-length enriched loaves, pizza sticks, even long focaccia bases. When the menu wants to grow, the equipment shouldn't be what says no.
And if right now you only do a 250–400g standard baguette? You're fine. A big machine that also does delicate small work is the whole point—the 50g floor is the proof.


Mini Baguette Moulder 50g–1.25kg, Natural Felt Gentle Shaping, 220V Single Phase


Here's the part people miss: the win isn't the 35 minutes you save.​ It's that your head baker gets stepped down off the moulding bench and goes back to R&D, fermentation control, and oven management—the things that actually move your average ticket.
0.75kW for context: less than your mixer's rounding error, and cheaper to run than the ice machine. Nobody needs to lose sleep over this line on the bill.